Series 300 is Performance-Inspired and Precision-Engineered

• Long-term weather-tight performance
• Custom trim and flashing details available
• One-piece clip allows unlimited thermal movement
• Rigorously tested against leaks and hurricane-force winds
• Ideal for structural and/or architectural applications
• Can be installed over open purlins or solid decks
• Suitable for slopes as moderate as ¼:12, on steeper slopes, or vertically as a wall panel
• 2-3/8" symmetrical seam with a separate, easy-to-install seam cap
• Factory-applied hot-melt sealant that remains isolated from the clip
• 3/8" clearance between panel and substrate promotes ventilation
• 12-inch, 16-inch, and 18-inch panel widths
• Wide variety of materials and colors
• Unlimited Thermal Movement and Watertight Performance

The dynamic nature of a metal roof is embraced and facilitated by the Series 300 system. The unique one-piece concealed clip, made of heavy 16-gauge galvanized or stainless steel, is designed to provide maximum structural integrity while allowing unlimited thermal movement. The clip also elevates the panel 3/8-inch off the substrate to allow for air movement.

The one-piece clip, isolated seam sealant, custom trim, flashing, and system details all work together to accommodate the natural expansion and contraction of metal that occurs when it is exposed to varying temperatures. Each Series 300 roof is engineered for unlimited thermal movement to maintain the roof's structural integrity and provide a lifetime of watertight protection.


 

ZIP-RIB Structural Metal Roof System

Design Characteristics

• Long-term weather-tight performance
• Custom trim and flashing details available
• Concealed clip allows unlimited thermal movement
• Rigorously tested against leaks and hurricane-force winds
• Ideal for structural and/or architectural applications
  • Can be installed over open purlins or solid decks
  • Suitable for slopes as moderate as ¼:12 or on steeper slopes
  • Available vertically as a wall panel
• Structural, mechanically seamed metal roofing panel
• Can be zipped and unzipped, for easy panel removal if needed
• Standard Panel Depth: 2-1/2”
• Available Panel Widths: 12”, 16”, 18” nominal coverage
• Wider widths up to 22” subject to inquiry
• Factory or field roll formed / mechanically curved
• Wide variety of materials and colors

Available Materials

• Aluminum: .032”, .040”, .050”
• Galvanized: 24, 22, 20 & 18 gauge
• Stainless Steel: 22 & 24 gauge
• Copper: 16oz, 20oz & 32oz
• Zinc: .7mm, .9mm, 1.2mm
• Mill Finish or with Flouropolymer (Kynar) coating
• Smooth or Stucco Embossed Surface

 
*Other materials, gauges & custom coatings available
*Perforated available (except Galvanized)


 

Series 300

Curving (convex, concave and "S" curves)
Tapering (to more than 80-feet in length)
Long panel factory manufacturing (up to 85 feet)

On-site fabrication of factory-quality straight or curved panels is available

The Installer's Advantage

• Sleek, balanced, proportional look that complements any design
• No interlocking male/female seams to worry about gives installers better control over when and where panels are installed
• Install panels in either direction, or both directions, at any time
• Start from any point on the roof
• Run simultaneous crews to cut completion time in half
• Work around roof protrusions and other obstacles
• Mechanical seamer quickly and permanently seals the seam caps at a rate of 60 feet per minute, and runs in both directions
• Reduces waste since each piece of a cut panel can be used for the opposite sides of a detail condition
• If a panel needs to be removed or replaced, ONLY that panel needs to be removed or replaced - not every other panel between it and the roof's edge

 

ZIP-RIB

• Curving (convex, concave and “S” curves)
• Tapering (to more than 80-feet in length)
• On-site fabrication of factory-quality straight or curved panels is available

 

Series 300

Warranties:*

20-year finish warranty for Kynar 500® fluorocarbon coatings
Materials and workmanship warranty
Watertight warranty for qualified applications
Series 300 Architectural Specification available on request.
*Sample warranties are available. We encourage inclusion of warranty samples in specifications to streamline the bidding process. Kynar® is a registered trademark of Elf Atochem North America Inc.
 

ZIP-RIB

Warranties:

• 20-year finish warranty for Kynar 500® fluorocarbon coatings
• Watertight warranty for qualified applications

Zip-Rib Product Testing

• AAMA 501.1 wind driven rain
• ASTM E-1592 wind uplift (structural performance, tests to failure)
• ASTM E-1646 water penetration
• ASTM E-1680 air infiltration
• ASTM E-2140 water penetration & vertical load (submerged)
• UL-90 Uplift, UL Class “A”, UL P-XYZ Assemblies